DIY

DIY Roller Shades, How to Make Your Own Roller Shades

Share

DIY Roller Shades, How to Make Roller Shades from Scratch — When you make your diy roller shades, you can change the look of a room in less than an hour, whether you start from scratch or refurbish an old shade. Use these instructions to create the perfect shade for your room

DIY Roller Shades from Scratch, How to Make Roller Shades

DIY Roller Shades, How to Make Roller Shades from Scratch

Making Shades

Window treatments are a quick and simple way to add interest to a room’s decor. When you make your own diy roller shades from scratch, you can switch things around inexpensively and have fun while you plan and create your coverings.

Recycling Shades

Customize old shades and “go green” at the same time. If you do not have old shades of your own, scour garage sales and retail shops for recyclables. You can use any shade that still has its basic structure intact, no matter the color of the shade or the stains it might have. If the shade is torn or tattered, salvage the roller mechanism for the next section.

Refurbishing shades is a simple process. For a fun and practical option, especially for a cover that will rarely be raised, paint the shade with blackboard paint. You can then use it as a memo board or decorate it with colored chalk designs.

Must Read:

You can also renew your old shade with a wallpaper or fabric cover. Measure the shade and cut the fabric about 1/2 inch larger on all sides. If your shade has a dowel at the bottom, measure all the way to the back. Use spray adhesive to attach the fabric, folding the extra to the back. Add some fringed trim to cover the tabs on the back, or cut another piece of fabric to attach there.

Paint and stencil or stamp your shade for a whimsical look. Cover the whole thing with a pretty background cover and then use stencils or wall stamps to add a design to the shade’s front. Embossing powders or beads can add texture and dimension, as well.

Create a faux window scene by covering the top half of the shade with fabric. Then paint an outdoor scene on the bottom half, overlaying it with painted “panes” to create the impression of looking through the window.

DIY Fabric Roller Shades – How to Make Roller Shades from Scratch

New Shades

Things You Will Need
  • Roller mechanism
  • Curtain fabric –cotton/cotton-poly blends work best, but you can use nearly anything that isn’t too bulky
  • Heavyweight fusible interfacing
  • Iron
  • 1/2-inch dowel

For this project, you will need a roller shade kit from the hardware store or the mechanism from an old shade.

Decide if you want the shade to fit inside the window, which is traditional, or to extend beyond the window to cover part of the wall. Measure the area to determine the desired finished size of the shade.

Add four inches to the length of your shade and one inch to the width; this will allow for the casings and the seam allowances. Cut two pieces of fabric and one of the interfacing to match the new measurements.

Fuse the interfacing to the wrong side of one piece of fabric with your iron.

Pin the fabrics together with the right sides facing. Stitch around all four sides, with a one-half inch seam allowance. Leave two to three inches open for turning.

Must Read:

Trim the seams to one-fourth inch, and turn the shade right side out. Hand-stitch the opening.

Fold the top of the pieces to the back to make a two inch casing and pin the fabric. Stitch about one-fourth inch from the edge; if you like, use a contrasting thread color to add decoration to the shade.

Insert the shade mechanism, following the manufacturer’s instructions, as each style may be slightly different.

Fold one inch of the bottom of the shade to the back and stitch it down to make a casing. Insert the dowel. You may paint the dowel to match the shade, if you want, or you may stitch the sides closed to keep it from showing.

If you prefer to omit the bottom dowel, you may also hang a ring or a string of beads to the bottom hem to pull the shade up or down.

If you use these instructions on how to make roller shades (make your own diy roller shades from Scratch), you can easily match the room’s decor, or make quick and inexpensive changes when you get tired of the existing theme.

Resources of DIY Roller Shades from Scratch

  • Source: authors own experience.
  • Photo “DIY Roller Shades, How to Make Roller Shades from Scratch” courtesy of https://www.istanakecilku.com
  • Photo “DIY Fabric Roller Shades – How to Make Roller Shades” courtesy of http://www.gardenweb.com/

Recent Posts

  • Home Improvement

The Art of Choosing the Perfect Coffee Mug: a Guide to Ceramic Cups

In the rarified world of the affluent arbiter of taste, every indulgence is an opportunity…

2 days ago
  • Home Improvement

The Ultimate Guide to Choosing Rta Kitchen Cabinets for Your Remodel

When it comes to remodeling your kitchen, selecting the right cabinets is crucial for both…

2 days ago
  • Home Improvement

How to Outsource Airbnb Cleaning Service

Maintaining a pristine and welcoming space is paramount in the fast-paced world of Airbnb hosting.…

4 days ago
  • Real Estate

How a Virtual Staging Company Can Transform Your Real Estate Game

Imagine this: You are walking into an empty space and it transforms into a beautifully…

4 days ago
  • Home Improvement

Maintenance Tips for Wall-mounted Split System Air Conditioning

Wall-mounted split system air conditioners are a popular choice for households and businesses due to…

7 days ago
  • Home Improvement

Professional Vs. Diy: When to Call the Experts for Your Clogged Drain

A clogged drain is a common household problem that can be a major inconvenience. Whether…

1 week ago