Brad nailers and finishing nailers are very similar on the surface (often called a finishing nail gun).
The two nailers are precise rather than mass nailing. However, all functions and uses are distinct.
Let us now compare the two styles of nail guns to each other.
A brad nailer looks and works like a nail gun. But unlike any other nailer on the market today, it does not actually fire nails. A brad “nailer” shoots brads.
For those that are unfamiliar with a brad nail, they are simply a thin nail. The typical brad nail has an 18 gauge nail and is usually just 0. 0475-inch cross-section.
As you can see, that is very small for a nail gun. Many inexperienced DIYers have most likely never used nails so tiny and thin.
You can position directly where you need to, and it will allow you to shoot the thin nail where you need it.
A finish nailer performs a similar function to a brad nailer. A finish nailer, like a brad nailer, would not be used for most of a job or project.
Instead, you only use it in very particular circumstances. A finish nailer, rather than a standard nail gun, will be used to fix trim or molding.
In terms of strength, a finish nailer lies somewhere in between brad nailers. And heavier-duty larger nail guns such as framing nailers.
Finish nailers are more powerful than brad nailers but not as powerful as a framing nail gun.
The typical finishing nailer can handle a bigger nail in terms of size, ranging from 1 inch to 2 1/2 inches in length.
To begin, when used, they both leave different-sized holes in wood.
As every woodworker or carpenter will tell you, using a nail gun on wood always requires wood putty to cover the hole created by the nail gun.
This is important by using a finish nailer. A Finish nail hole also requires the use of putty to cover them. (though not as often as with the other nail guns).
Brad nailers, in general, do not leave a visible nail hole in the material.
If the material is particularly fragile or thin, it can leave holes. But you just need a small amount of putty to fill them.
The brad nailer is designed to fire an 18 gauge brad nail, while the finish nailer will fire either a 15 or a 16 gauge nail length.
To be more specific, the diameter of the smaller nail surface, the higher the gauge number.
When we compare the two electric nailers, finishing nailers are the strongest and can handle heavy or thick trimming.
If you chose to be using a brad nailer for this scenario. Then you run the risk of the lightweight trim or crown molding falling off the wall.
The brad nailer is the best choice for light trims, such as creating a hole in the wall. And the finishing nailer’s strength would become a liability.
One of the main differences between the two is that brad nails will not break up or crack thin wood pieces. Another significant difference is how well each nailer handles corners.
Many carpenters tend to use brad nailers on corners because they do less harm than finish nailers.
Choosing which nailer to use is heavily influenced by the density and volume of whatever you are working on.
When working with hardwood or thick plywood, it is best to use a finish nailer. At the same time, the brad nailer is better suited for light trims.
Most people would find a finish nailer to be more beneficial than a brad nailer. So, if you are trying to decide which one to get for your tool collection, I would go with the finish nailer.
Find the ideal prayer mat for a deeper spiritual experience with our guide on materials,…
Avoid costly damage with expert tips on preventing and fixing bad plumbing. Protect your home…
Discover why Chesterfield sofas are ideal for seniors: effortless use, ultimate comfort, easy maintenance, and…
In the realm of interior design, the quest for striking yet versatile elements often leads…
Sydney's plumbing industry is a vibrant and essential sector, offering numerous opportunities for skilled professionals.…
Congratulations! You just bought your first home. Now comes the exciting (and maybe slightly overwhelming)…