Home Improvement

7 Ways to Properly Care for Your Water Heater

Share

The water heater is very valuable in your home. It provides you with hot water for various household tasks, such as taking a shower or washing dishes. If you lack access to hot water, your quality of life may suffer.

Keeping the water heater in good shape is vital for several reasons. Providing your water heater with proper maintenance can prolong its lifespan while enhancing its overall energy efficiency.

image - 7 Ways to Properly Care for Your Water Heater
7 Ways to Properly Care for Your Water Heater

In case you’re facing any issue with your water heater that’s beyond your skills, hiring a professional would be a good decision. Consider checking out the services of a reputable plumber Boston MA to deal with the water heater problem you’re facing effectively.

A regular maintenance routine for your water heater can greatly help minimize the chances of breakdowns which is crucial in ensuring minimal disruption to your life. Here are several ways to properly care for your water heater.

1. Conduct Regular Inspection

If you want your water heater to stay in good shape for years, make an effort to conduct regular inspections. As part of routine maintenance, the inspections will help you pinpoint potential problems while in the early phase, which is when they’ll be easier to repair. Make it a priority to keep your water heater operating properly and efficiently.

2. Perform Yearly Flushing

It’s best to drain your water heater once a year. The reason for this is to allow you to clean out the interior of the tank and eliminate any buildup of sediment. Although the sediment will not harm the water heater, it’ll significantly impact overall efficiency in the long run.

If you want to drain your water heater effectively, it’s crucial to turn off the water supply and power to the water heater. Affix a hose to the water heater and drain any remaining water from the tank. Allow the water to cool for a few minutes before beginning this task.

Once you clean the tank out, you can refill it and switch it back on. Avoid turning the water heater back on until you finish refilling it. Otherwise, it’ll put unnecessary strain on the heater as it attempts to warm up water that isn’t there.


Read Also:


3. Maintain Proper Insulation of The Tank

Providing the water heater with proper insulation can provide several benefits. Aside from helping cut down on your utility bill, it can also extend the lifespan of your water heater.

A well-insulated tank prevents the heat from escaping, which means the water heater will no longer strain to warm up the water, which can help it last longer. In the long run, less energy is consumed, lowering your monthly utility bill.

4. Reduce the Temperature Setting

The majority of water heaters are designed with a higher than necessary temperature. It’s dangerous in general because it causes the water to heat up faster than it should, causing burns.

Unfortunately, most heaters reach temperatures of up to 140 degrees Fahrenheit, when most hot water applications only need temperatures of up to 120 degrees Fahrenheit. Reduce the temperature to around 120 degrees Fahrenheit or lower to save energy and avoid burns.

5. Test the Temperature Pressure Relief Valve

You should also regularly test the temperature-pressure relief (TPR) valve to ensure it’s in good working order. The valve is in charge of releasing pressure within a water heater when it becomes too high.

Insert a bucket or pail beneath the discharge pipe attached to the TPR valve to test it. Lift the lever once the pail or bucket is in place. If water flows out and stops when you lower the lever, it indicates that the temperature-pressure relief valve is functioning properly.

However, if the water doesn’t drain or there’s significant leakage, the valve will most likely need to be replaced.

6. Regularly Replace the Anode Rod

The anode rod is a critical component of your water heater that should be replaced regularly, ideally every five years.

It attracts corrosive minerals in the water, rusting the rod instead of the tank’s interior. Once the rod wears out, the corrosive mineral can damage the interior of the tank. You need to ensure that the anode rod of your water heater stays functional to ensure the best protection for your water heater.

7. Schedule an Inspection By A Professional

Although you can inspect your water heater regularly, hiring a professional to do so and make any necessary repairs will be more effective. A professional plumber possesses the skills and knowledge to spot potential problems early on.

Final Thoughts

Maintaining the overall efficiency of your water heater is important. A well-functioning water heater is less likely to cause any disruptions to your life. Regular maintenance and knowing when to call a professional plumber will go a long way toward preventing problems and ensuring that your water heater runs smoothly.

Recent Posts

  • Home Improvement

The Art of Choosing the Perfect Coffee Mug: a Guide to Ceramic Cups

In the rarified world of the affluent arbiter of taste, every indulgence is an opportunity…

14 hours ago
  • Home Improvement

The Ultimate Guide to Choosing Rta Kitchen Cabinets for Your Remodel

When it comes to remodeling your kitchen, selecting the right cabinets is crucial for both…

19 hours ago
  • Home Improvement

How to Outsource Airbnb Cleaning Service

Maintaining a pristine and welcoming space is paramount in the fast-paced world of Airbnb hosting.…

3 days ago
  • Real Estate

How a Virtual Staging Company Can Transform Your Real Estate Game

Imagine this: You are walking into an empty space and it transforms into a beautifully…

3 days ago
  • Home Improvement

Maintenance Tips for Wall-mounted Split System Air Conditioning

Wall-mounted split system air conditioners are a popular choice for households and businesses due to…

6 days ago
  • Home Improvement

Professional Vs. Diy: When to Call the Experts for Your Clogged Drain

A clogged drain is a common household problem that can be a major inconvenience. Whether…

7 days ago