Dream Lands Design
You're here: Home » Home Improvement » Common Equipment Used for Renovation

Common Equipment Used for Renovation

Home renovation, whether remodeling your existing space or adding new extensions is a difficult and time-consuming job. People usually hire professional help to get it done.

The job gets even harder when you do not have the proper tools and lack the knowledge of how to go about renovating your living space.

image - Common Equipment Used for Renovation
Common Equipment Used for Renovation

Reality TV may make it look like an easy job, but it is far from easy. Home renovations usually require a lot of different types of tools.

Ranging from portable scaffolding to hammers, drills, and something as simple as a screwdriver. The right amount of equipment makes this already hard job a little bit easier to do.

A renovation job can range from a simple task like installing a small bookshelf on the wall to something as difficult as getting your ceiling completely re-done.

Easier renovation jobs require minimal tools, while bigger jobs require different types and varieties of tools, and usually, professional help is taken.

Nobody expects you to take down a wall inside your house by yourself. Today we are going to look at some common tools and equipment that you might need for your next renovation project if you plan to do it yourself.

Read Also:


A hammer is the most common equipment that you will need for any type of renovation project. It is a type of tool that should be present in every household. If you do not have one, consider getting one, preferably one that has a curved claw at one end to pull out nails.

There are a variety of hammers available on the market. Ranging from one with wood handles to ones that have a fiberglass handle.

Consider getting one with a fiberglass handle as it will help in cushioning the shock when driving nails. Look for a hammer that has been drop forged as they tend to be stronger and last a long time when compared to regular hammers.


A ladder is something that is recognized easily by every person. A ladder can be found in every house and workplace in today’s modern world, and it has been used for centuries. Ladders are a necessary piece of equipment if you are looking to do any kind of renovation work around the house.

The use of a ladder is crucial if you want to stay safe while getting access to those hard-to-reach places at a certain height. A ladder is always better and safer when compared to stacking buckets and getting on them to reach places at a certain height.

Aluminum ladders are the way to go if you are looking for something that is light, cheap, corrosion-resistant, and can withstand a lot of weight placed on them. A visit to the local hardware market can be done to check out ladders of different varieties and lengths.

Hand Saw

A hand saw is the most common piece of renovation hardware that you should have in your toolbox. Power tools have replaced the need of having a hand saw; however, there is nothing like an old-fashioned hand saw to see things up.

There are many types and sizes to choose from. One of the most popular types of hand saw is a panel saw. This type of handsaw is highly recommended by professionals as it has cross-cut teeth and cuts things in both push and pull strokes.

With this type of saw, you can get twice the amount of work done in half the time. Also, go for a saw that has a wooden handle to avoid it from slipping from your hands and causing an unnecessary injury.

Drill And Drill Bits

It goes to say that tools are a lifetime investment. However, a cordless or corded drill sits at the top of the list of equipment to have when renovating. Whether it is a lounge remodel or a bathroom remodel, invest in a battery-powered lithium drill.

It is light, and the battery is less toxic as compared to nickel-cadmium batteries and takes little time to get fully charged. Get one that has a good trigger control so you can adjust the drilling speed. Also, look for a drill that rotates in both clockwise and anti-clockwise directions.

Choose a drill that has a torque selector so that it slips once the screws have been secured to their place and do not forget to check if it has a light, as it can be a blessing to see in those dark hard to see nooks and crannies.

You should also get a drill bit set along with your cordless drill as you might need to drill different-sized holes during a renovation project. Not having the right type and size drill bits make your drill useless.


Ranging from the snub nose, needle nose, or crimping pliers, they are a must-have in your toolbox when you are looking to renovate a space. Go for a needle nose plier as they are good for holding onto to wires that might be placed in tight space.

They are also used for removing nails and screws. Go to your local hardware shop and pick up a pair of pliers as they will make your life easier when renovating.

Measuring Tape

It is something that is easily forgotten, but it is really important to have a measuring tape when renovating a space.

You cannot even think about starting a renovation without a measuring tape. When it comes to renovating, everything should be measured precisely and accurately; otherwise, the renovation job will be a complete mess.

Go for a measuring tape that is slotted at the end because of this you will be able to latch one end to the head of a screw or nail and will be able to measure by yourself without the help of another person holding it at one end.

There are many tricks and tips you can learn about using a measuring tape, but the most important tip that anyone can give you is not to forget about it when renovating.


A wrench is an essential piece of equipment to have during a renovation project. Preferably, go for an adjustable wrench to latch on to different sizes and types of screws and nails.

They are great for pulling objects out of wood and metal and fastening in items such as nuts, bolts, and screws. Go for a wrench that is made of steel and is narrow so that you can use it in tight spaces.

The Final Words

Having the right type of equipment during a renovation job is a blessing for you. Consider buying the proper tools and equipment to make your life easier.

Tools not only come in handy during a renovation job, but they also have great use for small jobs around the house, such as fixing a light bulb socket or attaching a frame to a wall.

If you plan to do the renovation job yourself, be safe and secure and use the right tool, otherwise hire a professional to do it for you. Today we have made you aware of some common equipment that is used during a renovation job.

Add comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Your Header Sidebar area is currently empty. Hurry up and add some widgets.