Dream Lands Design
You're here: Home » Home Improvement » 4 Types of Common Faucet Problems and When to Call a Plumber

4 Types of Common Faucet Problems and When to Call a Plumber

Rust stains and corrosion are common problems that affect faucets and pipes in warm, humid locations.

Germantown, MD, has high humidity levels of up to 51%. Hence, residents also face other problems like leaks, clogs, and general wear and tear.

An experienced plumber germantown md, can fix or replace your faucet. These experts use specialized tools like cutters and strap wrenches to fix faucet leaks or remove stains.

image - 4 Types of Common Faucet Problems and When to Call a Plumber
4 Types of Common Faucet Problems and When to Call a Plumber

Licensed plumbing companies also offer service guarantees and insurance. Besides fixing your faucet, they can educate you on preventive measures to avoid future faucet problems like:

Low Water Pressure

Old faucet models may have aerators at their openings. If these air holes get clogged with dust, dirt, or debris, the water pressure slows down. If the block is severe, the water may stop altogether.

Airhole blocks are almost inevitable if your faucet is old. Hence, it is recommended you invest in a new faucet model that does not have aerators to eliminate the problem.

The slowing down or stopping of water flow from your faucet can cause damage to the connected pipes. Water pressure that builds up causes the pipes to crack or even burst.

Faucet Leaks

Faucet leaks are other common issues homeowners deal with regularly. Consider calling your local plumber in Germantown, MD, immediately if you have a leaky faucet.

Defective parts like washers, gaskets, and o-rings are common causes of faucet leaks.

Germantown, MD, experiences average high temperatures of around 33 degrees C.

Corrosion and mineral build-ups are other common faucet leak triggers in places with warm, humid weather.

Plumbing experts will first identify and pinpoint the leak before sealing it or replacing your faucet.

You could end up wasting a lot of water and incurring high water bills if you don’t fix faucet leaks immediately.

Read Also:

Noises from the Faucet

Noises from the faucet are usually called water hammers. Water flow is stopped abruptly when you shut off the faucet tap. You may hear a squealing noise or thuds each time you turn the faucet handle.

These noises typically occur due to inadequate lubrication. Your plumber will remove or uninstall the faucet and lubricate each component to prevent the nose.

Loose components can also cause your faucet to “screech,” whistle, or scream.

Plumbers will tighten all loose components based on your requirements. They may be able to identify the root cause of the problem based on the sound.

Rusting and Staining

Baking soda concoctions cannot remove stubborn faucet stains or get rid of rust on the faucet.

Plumbers identify the cause of rusting and staining and then tackle the issue appropriately.

Lime, calcium, and mineral deposits are common causes of faucet stains. Lack of proper cleaning and maintenance are other causes.

Certified plumbers will use solutions, grease, and other stain removers to rid the faucet completely of stains and rust.

Excessive rusting and staining may require faucet replacements. You may note that outdoor faucets are more vulnerable to rust than indoor ones.

Wrap Up

Installation mistakes and lack of effective faucet maintenance can instigate several faucet problems.

Homeowners can avoid these problems by installing high-quality, rust-resistant faucets for indoor and outdoor use. The entire unit may break or collapse if faucet problems are left unattended.