Heating Not Working? Signs You Need Furnace Repair

Did you know that the average furnace can last from 15 to 25 years?

However, that long life only applies to units that undergo routine furnace maintenance.

On the other hand, a lack of upkeep can result in your heating not working. Worse, delaying needed repairs can lead to your system’s early demise.

For that reason, it pays to know when to call the pros for help in fixing your Springville furnace problems. We listed the top indications in this guide, so be sure to read on.

Inadequate Heating

Is your house not warming up even with the furnace set to maximum temperature? If you have a gas furnace, a clogged burner may be the culprit behind that problem.

One reason is that blockages in burners can result in incomplete combustion. Unfortunately, incomplete combustion generates less heat energy than complete combustion.

A defective thermostat may also cause inadequate heating. In that case, the heater isn’t warming up your home enough due to the thermostat’s wrong readings.

Before you call the pros, though, check the furnace filter first and replace or wash it if it’s filthy. Next, ensure all your air vents are clean and free of obstructions.

If you’re still freezing in your home after that, then it’s time to call a furnace repair company.

Read Also:

• What You Need to Know Before Buying a Furnace
• Furnace Maintenance and Safety Tips for the Fall
• Should You Repair or Replace Your Furnace?

No Heat at All

Check the power and circuit breaker first if your heater doesn’t turn on at all. You may only have to reset the breaker to get your furnace working again. If you have a gas furnace, make sure the gas line shutoff valve is open.

Make sure to check the furnace filter, too; it should be clog-free. Too much dirt build-up on filters can make a furnace’s heat exchanger shut off too fast. That can lead to your heating system’s inability to produce heat.

If none of those things help, you may already have a broken furnace motor. In that case, your next step should be to call a heating repair professional. If you are residing in Kimberly, Find the nearest local furnace repair in Kimberly, ID to fix your heating problems in your furnace immediately.

Rotten Egg Smells

If your house smells like rotten eggs after switching on the furnace, turn it off right away. That’s especially true if you can also hear bubbling, hissing, or whistling noises. All those are indications of a gas leak.

Those rotten egg smells come from mercaptan, a chemical mixed into natural gas. It’s there as a safety precaution since natural gas is odorless.

In any case, switch off your furnace as soon as it emits sulfur-like odors. If you can, open some windows before you exit your home. Then, call your gas company and a furnace service provider to help you deal with the leak.

Stop Worrying About Your Heating Not Working

Keep in mind that cold weather can cause illnesses and even be life-threatening. That’s why you want to make sure your home heating equipment is always in tip-top condition.

For the same reason, it pays to know when to call a furnace repair pro to tell them about your heating not working. That way, an expert can come to your home and fix your malfunctioning heater ASAP.

Are you interested in more home improvement and repair guides like this? Then feel free to check out our other informative blog posts!