How Long Do Roof Restorations Take?

Table of Contents Show

How Long Should Quality Roof Restoration Take?

Roof restoration is different from repairing it, it is making it look brand new again.

This is usually a better option than replacing your whole thing and can be less expensive, as well.

The contractor will look at your roof and determine what needs to be done. It can take up to three days to get the job done if you want a quality job done the right way.

This is usually not a job to be done by a do-it-yourselfer because of all the intricacies that come along with it.

image - How Long Do Roof Restorations Take? — How Long Do Roof Restorations Take?

You will need to replace tiles or shingles and you will need to repoint and repaint, as well. You also must worry about safety since the job must be done so high up.

There are quality companies that can do this job for you.

You can go to https://www.yourroofrestoration.com.au/ to see if they can do it for you. This company has been around for a long time and can help you.

There are many types of restoration, and they will differ with each home.

Even if two homes look the same, the work needed may be different.

It will also differ depending on the materials that have been used on the roof.

If you have a tile roof, the contractor will come out to see if there are tiles that have cracks or mold. If they see an issue, these tiles would be noted and replaced later.

The contractor can also deep clean the tiles so that they look new.

For a cement roof, the contractor will clean the tiles and then remove all the debris.

They will then pressure wash the roof. After that, they will look for any broken or cracked tiles.

They will fix or replace those, and then reseal the whole roof.

image - How Long Do Roof Restorations Take?

A metal roof will be cleaned and repaired, if possible.

The technicians will come in and restore the metal with galvanized steel or Colorbond so that it will look as good as new.

Your roof will work as well as new, as well.

Quality Roofing Restoration

1. Safety Measures

The first thing that will be done is that safety measures will be put into place.

This includes putting temporary edge protection and safety harnesses.

See here for more safety measures that are taken. Anything else that they can do to provide safety for the workers, they will do.

Safety measures are important to the roofing contractor because they don’t want any of the technicians to be hurt on the job. Safety is the most important part of any roofing job.

2. Water-Tight

The next thing to do is to make sure that everything is watertight.

This also includes re-bedding the tiles and repointing the ridge capping when it is needed.

If there are broken tiles, ridge caps, or barge caps that are broken they will be replaced.

These items are necessary for your roof to look good and to keep your home dry.

They also protect your home from any other damage that could be caused when these items are broken. Keeping them in good shape will keep your home safe.

3. Water Blasters

Many roofing companies will use water blasters to clean to make it look good.

This will clean all the buildup up there as well as the moss and mildew.

If they need to clean leaves and other debris, they will use a blower vac.

4. Primer and Sealer

Primer and sealer are then applied to your tiles to make sure that your roof stays dry.

They will use at least two coats of this in the color of your choice.

You can also choose a glossier finish with a Nano Glaze or heat-reflective sealer.

5. Clean Site

After everything is done, the site will be thoroughly cleaned so that you can’t even tell that there were people working on your home.

Read Also :
Questions to Ask Before Hiring Oceanside, CA Roofing Contractors
What Is the Best Type of Roof for Solar Panel Installations?
Which Roofing Shingles Are Best

The safety rails and harnesses will be removed.

The homeowner will be taken on a final inspection to make sure that everything is cleaned up to their standard.

How Long Does it Take?

This depends on the amount of work that must be done, but you can usually have your roof restored in about three days.

The weather is also a big consideration in how long it will take, as is the color that you have chosen.

Teams will try to make sure that your daily life is not disrupted too much.

If there are weather delays or delays due to other things, you will be notified by the team leader.

You will also be notified if there is unexpected work that needs to be done. This could also take longer to finish the job.

The Cost of the Job

With many variables, it is often difficult to give a ballpark figure of what it will cost to do the job.

It is best if the contractor can come out and give you an estimate because this is solely based on your home and your needs: https://hipages.com.au/article/how_much_does_roof_restoration_cost.

Typical costs could be between ten and twenty-five thousand dollars but can be more or less than that.

Making the Right Choice

There are many choices that you need to make when it comes to choosing a roofing contractor to do your restoration.

You want to make sure that the company is licensed and insured against damage or injury.

You can check online reviews to make sure that the company you want has good reviews.

You also need to make choices about your roof itself. You can choose to have it repaired, restored, or replaced. The choice you make here can also alter the cost of the job.

You also need to choose what color, if any, you want the sealer to be.

Another option you need to look at is whether you want the high gloss covering or the heat-reflective sealer.

These options will also affect the cost of your restoration.