Table of Contents Show
Learning how to paint can be a handy skill especially when remodeling your home. A way you can paint quickly and efficiently is by using a DIY airless paint sprayer.
This is because painting interior or exterior surfaces around your home can give your home an attractive new look that you desire.
How to Use an Airless Paint Sprayer
Whether you are a professional painter or a “do-it-yourselfer“, you can complete a paint-job quickly and efficiently by painting with an airless paint sprayer for home painting.
According to the article “How to Use an Airless Paint Sprayer” on Online Tips, it “works by atomizing whatever finish you are applying by forcing the finish through a tiny tip opening using high pressure“.
Read Also:
Things You May Need When Painting With an Airless Sprayer
- Home appliance repair kit
- Brush
- Spray shields/old newspapers
- Protective clothing
- TSP (Trisodium Phosphate) cleaning solution/soap solution
Basic DIY Steps for Painting With an Airless Paint Sprayer
Step 1
Prepare your airless sprayer for painting. Check the sprayer for damages, including checking the hose, gun, tip, and pump.
Fill the sprayer with water to check for leaks and look out for kinks and other damages on the hose.
Repair leaks using appropriate adhesives from your home appliance repair kit and clean the tip with a brush.
Remember:
Never attempt to fix a damaged hose because this poses a risk of a potentially harmful projectile in case the hose breaks when in use. Replace a damaged hose with a new one instead.
Step 2
Assemble your airless sprayer parts together after ascertaining everything is in good condition.
Install the gun, hose, and guard and select the appropriate sprayer tip that will give you your desired finish. Your airless sprayer should be ready for use after all its parts are correctly assembled.
Remember:
Sprayer tips come in varying sizes that determine, among other things, the width of your spray.
Refer to your operating manual that comes included in the airless sprayer purchase package for specific instructions on how to assemble the model parts and recommendations for sprayer tips to use to achieve desired finishes.
Step 3
Using paint sprayer for cabinets. Cover surrounding surfaces or furniture that you do not want to catch paint with spray shields or old newspapers and fill the sprayer tank with paint up to the manufacturer’s recommended level, as shown in the manual.
Set the sprayer pressure to an initially low-pressure level by adjusting the pressure control knob and apply paint over the painting surface in a continuous sweeping motion.
Overlap the spray layers by sweeping the sprayer tip over the edge of the previous spray layer until you attain a smooth even finish. Allow the paint to dry completely to finish.
Remember:
For best results, keep your airless sprayer at a constant distance of about 12 inches from the painting surface.
Read Also:
- Paintjobs 101, 5 Things You Should Know About Paint
- What Are The Prime Responsibilities of Painters?
- Selecting a House Painter, A Simple Guide!
- How to Paint a House Like a Pro
- How to Paint a Kids Playroom
Tips to Keep in Mind When Painting
Adequately prepare the surface you want to paint before applying paint. Fill holes and remove nails and screws on the painting surface.
You may also wash interior walls with TSP (Trisodium Phosphate) solution and exterior surfaces with a soap solution and pressure washer.
Allow the surface you have cleaned to dry completely before you spray paint with your airless sprayer. Paint adheres well to a clean surface. Always ensure your painting surface is clean.
Warning:
Paints contain hazardous components that can cause health problems. Always wear protective clothing including eyewear, overall and boots when painting with your airless sprayer to protect yourself from hazardous paint ingredients.
